Solutions

Comprehensive Solutions: Innovating in Interiors, Roofs, and Exteriors

Interior Solution

Thanks to its vapor diffusion capacity, MicroSATE Go_Comfort® regulates the relative humidity of indoor spaces to around 55%, which is the value that provides comfortable conditions.

When applied indoors, MicroSATE Go_Comfort® ensures a homogeneous distribution of heat in the room through an endothermic effect. The temperature difference between the floor and the ceiling area can thus be less than 2°C, instead of the usual 10°C in rooms with radiator or air conditioning systems. This way, we avoid the “cold feet-warm head” effect, which is detrimental to people’s well-being.

 

It is a water-based product, without solvents or harsh chemicals. It does not release any chemicals recognized as allergens.

In summer, it absorbs moisture from the surroundings and expels it to the surface of the wall, similar to how the skin cools through perspiration in summer, providing pleasant coolness even without air conditioning. In winter, the ceramic microspheres radiate heat evenly from the walls and ceiling to the rest of the room, creating a sense of comfort. Additionally, the walls are drier as moisture is extracted from their interior, improving insulation.

With thermal balance, condensation formation on walls and mold growth is avoided, even in poorly ventilated spaces such as garages.

Roofing Solution

Like in all other cases, MicroSATE Go_Comfort® ensures significant energy efficiency both in winter and summer, saving energy and its corresponding economic cost.

Long-lasting protection of the roof against harmful environmental agents such as ultraviolet radiation, air pollution, dirt, acid, and salt spray, in adverse weather conditions.

It can be applied to all types of surfaces thanks to its excellent adhesion, including metal sheets.

MicroSATE Go_Comfort® is waterproof even under the most extreme weather conditions. It also has a noise-dampening effect caused by rain or hail.

Due to its elasticity, the appearance of cracks is reduced. It remains elastic in temperature ranges between -40°C to +150°C. Extremely flexible in joints.

Outdoor Solution

On one hand, the polymer resin, upon contact with water (rain, hail, snow, etc.), increases its volume by around 25%, becoming waterproof and protecting the facade. On the other hand, when environmental conditions are dry, the membrane, which is hygroscopic, extracts moisture from the surroundings and expels it to the exterior in the form of water vapor.

The final layer of MicroSATE Go_Comfort® is capable of reflecting and emitting the solar radiation it receives, so that only a small percentage of the received heat is transmitted to the interior, reducing the energy consumption required for space cooling.

MicroSATE Go_Comfort®, thanks to its resistance and elasticity, prevents cracks in façades and protects them from the deterioration caused by air pollution, saltpeter (in areas near the sea) and UV radiation.

It keeps the inside of the walls in low humidity conditions, preventing condensation and mold growth. As there are no cracks in the coating, there are no leaks or water ingress, so the facade is protected.

The color intensity durability of MicroSATE Go Comfort® is far superior to that of paints, extending the renovation deadlines for aesthetic reasons by 100%, which represents a saving in maintenance costs. When, after 10 years of applying paint to a facade, it looks deteriorated and with signs of fading, MicroSATE Go_Comfort® remains in a very similar state to its initial application.

It can be applied to different surfaces. In addition, we have specific primers for exterior and interior use that, both due to their resistance to UV rays and their elasticity against expansion and contraction, slow down the aging and deterioration process of the substrates.